When was the last time the roof of your building was inspected? If it’s been awhile, the roof could have problems lurking that require immediate attention. Some roof problems cause obvious signs such as leaks, while others produce subtle signs that are only detectable at first glance. In either case, leaving the issues unaddressed can cost you a small fortune when you finally repair them. If Roof Cleaning in Stamford on your own building has the problems listed below, an organization that focuses on commercial roofing should repair them quickly:
Buckled Panels
Roof panels buckle because of weather damage and poor installation. Regardless of the cause, the buckling allows wind to blow within the panels, making them loose. As the problem worsens, the panels begin to fall off, often coming off in large sections when a storm hits. Buckled panels are one of the most commonly fixed problems by companies that perform roof repair.
Expended Screw Holes
Expanded screw holes are another problem for panel roofs. As time passes, wind and fluctuating temperatures cause the screw holes in panels to widen round the screws that hold the panels set up. This creates a space where water can leak underneath the panels and soak the roof deck. After the deck becomes saturated, the problem is costly to fix.
Blistering
Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose a problem, large ones can rupture and invite water to seep under the bitumen. Once the blisters form, warm weather typically makes them worse. As a result of humid subtropical climate in a few regions of the united states, commercial roofing frequently experiences blistering.
Ponding Water
Blocked drains and improper sloping can cause water to assemble in small ponds on a roof. Repairing a blocked drain is easy, but fixing a sloping problem is more technical. Often, installing a taper insulation system to determine a new slope is the better solution. During the rainy season, resolving ponding water is one of the most common forms of roof repair.
Loose Flashing
Flashing prevents water from seeping in the crevice where in fact the roof abuts to protrusions such as chimneys and vents. As time passes, most flashing should be resealed. If it’s not, leaks could cause serious damage the deck and building interior. Most flashing problems are corrected during the course of scheduled maintenance.
Missing Mortar
Chimneys and high elements of brick walls that have sections of missing mortar may cause leaks. These leaks are often mistaken for leaks in the roof membrane, but a thorough inspection by way of a company that specializes in commercial roofing will reveal the real problem. Most parts of missing mortar could be repaired with basic tuck pointing procedures.
Conclusion
The problems above are a few of the most common reasons for roof repair. If they are corrected early, most problems are cheap to fix, but not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is a good solution to ensure problems are detected early.
-
Aug, Sat, 2023